Directional calibration

<p>[TOC]</p> <h3>1, Regular installation calibration instruction</h3> <p>For regular installation, after the device is installed and fixed, set the parameters as follows: 1.1 On the Install page, the mode type is selected as <strong>MANUAL</strong>. 1.2 On the Install page, select the installation direction as the corresponding type, and keep the acceleration sensor silkscreen direction on the device with the one in the menu drop-down list, <strong>for example, if the Z-axis arrow is up/Y-axis arrow is to the right, select ZUP_YRIGHT;</strong></p> <p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;amp;sign=c5513de7ac3b62c7c6ef61a32bbf144a" alt="" /></p> <p>1.3 On the Adjust page, click the ADJUST button. <strong>After calibration, the X/Y axis is 0 and the Z axis is about 1g;</strong></p> <p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;amp;sign=4e67a3308f12e982e398e33a4b9a1fd4" alt="" /></p> <h3>2, Irregular installation calibration instruction</h3> <p>For IRregular installation, after the device is installed and fixed, set the parameters as follows: 2.1 On the Install page, the mode type is selected as <strong>AUTO</strong>. 2.2 On the Install page, select the installation direction as“<strong>Unknown</strong>”；</p> <p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;amp;sign=d529d5feaf6ec14e68fa0fcfe6a6577c" alt="" /></p> <p>2.3 On the Adjust page,<strong> the numbers in each direction of X/Y/Z will become 0</strong> and will show the normal values till after the device has learned successfully automatically.</p> <p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;amp;sign=ec70208983db7154f7eea97e9076f322" alt="" /></p>