Usage Overview
<p>[TOC]</p>
<h3>I. Summary Description</h3>
<p>Posture Alarm, is based on the collection of GSENSOR sensor data, GPS data, etc. to carry out real-time calculations, so as to achieve rapid acceleration, rapid deceleration, rapid turning, collision, rollover and other abnormal events to make analysis and judgment, and generate the corresponding linkage action of the alarm. The list of combined sensor data input and function support is as follows:</p>
<table>
<thead>
<tr>
<th>Sensor</th>
<th>rapid acceleration</th>
<th>rapid deceleration</th>
<th>rapid turning</th>
<th>collision</th>
<th>rollover</th>
</tr>
</thead>
<tbody>
<tr>
<td><strong>GPS </strong></td>
<td>support</td>
<td>support</td>
<td>support</td>
<td>No support</td>
<td>No support</td>
</tr>
<tr>
<td><strong>GSENSOR </strong></td>
<td>No support</td>
<td>No support</td>
<td>No support</td>
<td>support</td>
<td>support</td>
</tr>
<tr>
<td><strong>GPS&GSENSOR</strong></td>
<td>support</td>
<td>support</td>
<td>support</td>
<td>support</td>
<td>support</td>
</tr>
</tbody>
</table>
<h3>II. Conditions of use</h3>
<p>1, The device has at least one module of GSENSOR or GPS.
2, Install according to the installation guidelines.
3, Calibrate GSENSOR and set the parameters.</p>
<h3>III. Process guidelines</h3>
<p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=89f6efeaf7fa1b75c40a5846701c693f" alt="" /></p>
<h4>- Function Verification</h4>
<p><strong>Office Testing</strong> For example: rollover alarm</p>
<p>1, First manually calibrate the device (<strong>ALARM SETUP-Gsensor-Adjust</strong>), after calibration, the value of Acc X&Y is 0, Acc Z is about 1g;</p>
<p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=b96957228fc81de152cc61278d0811ef" alt="" /></p>
<p>2, Set the Limit to high, easy to trigger, delay time to 5 seconds, check the alarm linkage - preview channel;</p>
<p>3, Turn the device upside down, see if the device preview interface will enlarge the preview channel checked, such as the device has been connected to the platform (JT808), you can see whether the platform-map-vehicle bubble display alarm information;</p>
<p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=468eb2808f85c7430e67e9e6b9a463ff" alt="" /></p>