Launch Video

[TOC] <h3>I. Summary Description</h3> <ul> <li>The device supports multiple Video modes, including power-on Video, timed Video, alarm Video, manual Video, etc.</li> <li>The device supports video usage options for disks, including primary video, backup video, mirrored video, etc.</li> <li>The device supports video channel selection, according to the access to the camera channel, you can choose whether the corresponding channel open video.</li> <li>The device supports the setting of video overlay information.</li> <li>The device supports switching selection of recording channels.</li> </ul> <h3>II. Conditions of use</h3> 1, Inserting a disk (SD/TF card/hard disk, etc. with a storage disk matching the device interface) and recognizing it successfully. 2, Access to cameras. <h3>III. Cautions</h3> 1, The selection of disks, choosing the right disk, can enhance the reliability of the video,How to select a disk can be found in the section on [disk recommendations and independent selection](<a href="http://118.195.179.210:9000/web/#/11/305">http://118.195.179.210:9000/web/#/11/305</a> "disk recommendations and independent selection"). 2, The choice of camera, access to the device supports the resolution of the corresponding camera, which can enhance the stability of the video recording, if you need to record video, then access to the camera with audio. <h3>IV. Process guidelines</h3> <img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=b88dc107ced73beb53d7f27e28bfb701" alt="" /> <h3>V. Detailed operation</h3> <h4>1.Quick Start(GUI)</h4> 1.1 【Required】In the RECORD SETUP-Storage-Disk Select the corresponding disk in the storage settings for the video function, you can set one of the record / backup video / mirror video. <pre><code> --record：Select the disk for this function to loop the video master stream； --backup video：Select the disk for this function to loop the master stream in case the master recording disk does not exist； --mirror video：Select the disk for this function and loop the video sub-stream；</code></pre> <img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=d3cdd351aef4f77e3fda9aad73792d11" alt="" /> 1.2 【Required】In the RECORD SETUP-Storage-Video select the video mode, it is recommended to select the Acc. <pre><code> --Select Acc, if you need to focus on the video after the flameout, please refer to the flameout delay video setting. --Select timed recording, please refer to the timed recording instructions to set the time period. --Select alarm recording, please refer to the alarm recording setting instructions to generate video only when the corresponding alarm is triggered. --Select manual recording, the function requires manual triggering of the video button to start recording (it is not recommended to select this function)</code></pre> <img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=1a7ad3c351db81f01ee0ba4936bf49a2" alt="" /> 1.3 【Required】In the RECORD SETUP-Stream-Main, select the video channel enable. It is recommended that the channel without a camera connected, select off. <img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=2ceddd311b3aeb853e19177c4ce59c88" alt="" /> 1.4 【Optional】In theMAINTION-Disk. This operation is optional and the device will be automatically formatted as a video disk within 5 minutes when a new disk is connected. <img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=e353e483ee554a0c8b8f3bf1b339f191" alt="" /> 1.5 【Optional】In the RECORD SETUP-Stream-Main, select the channel audio switch. <img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=349de39643b6313255a0142d7246f886" alt="" /> 1.6 【Optional】In the RECORD SETUP-Stream-OSD, select the information and coordinates to be overlaid on the OSD, etc. <img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=4d3de35a0cb110bf15d18ef90d91f64b" alt="" /> <h4>2.Quick Start(Web)</h4> 2.1 【Required】Select the corresponding disk in the storage settings for the video function, you can set one of the main video / backup video / mirror video. <pre><code> --main video：Select the disk for this function to loop the video master stream； --backup video：Select the disk for this function to loop the master stream in case the master recording disk does not exist； --mirror video：Select the disk for this function and loop the video sub-stream；</code></pre> <img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=37f1ddc5809999ed5ac763862a8d7fb5" alt="" /> 2.2 【Required】In the basic settings of the video, select the video mode, it is recommended to select the power-on video. <pre><code> --Select on video, if you need to focus on the video after the flameout, please refer to the flameout delay video setting. --Select timed recording, please refer to the timed recording instructions to set the time period. --Select alarm recording, please refer to the alarm recording setting instructions to generate video only when the corresponding alarm is triggered. --Select manual recording, the function requires manual triggering of the video button to start recording (it is not recommended to select this function)</code></pre> <img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=5574799b95aaa0a633f78e47254946d8" alt="" /> 2.3 【Required】In the video master stream setting, select the video channel switch. It is recommended that the channel without a camera connected, select off. <img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=5ae338f4dc1e6332ed478669735e1b5b" alt="" /> 2.4 【Optional】In the Format menu, format the accessed disk. This operation is optional and the device will be automatically formatted as a video disk within 5 minutes when a new disk is connected. <img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=8422c002ff17422b489607502d984642" alt="" /> 2.5 【Optional】In the video master stream settings, select the channel audio switch. <img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=1713fa7d69843add7a74531c667722a4" alt="" /> 2.6 【Optional】In the information overlay settings, select the information and coordinates to be overlaid on the OSD, etc. <img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=d5317a0568cb741ccf81cef7caf6d6ec" alt="" /> <h4>3.Status display</h4> 3.1 Display to view video status. <pre><code> --The red dot displayed to confirm the video status through the corresponding video channel of the direct screen. --The ability to display disk status and capacity information, etc., via the disk status information page. --Video status can be confirmed by means of video queries, referring to local video access instructions.</code></pre> <img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=9e9a8b8e8fbca02e559d3c17cf153cc6" alt="" /> 3.2 Device video indicator status. <pre><code> --Disk indicator：Blinking disk light for recording(SD). --Video indicator：This indicator flashes when the video indicator is present(HDD).</code></pre> <img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=f2be9756af5a4e23f75efed120857d50" alt="" /> 3.3 WEB view video status. <img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=9b7024e7ca90c19a81046fb4b7c399a6" alt="" /> 3.4 View video status on PC. <img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=4757e1740d41a16630658be418f11294" alt="" /> <h3>VI. Common Problems</h3> <ul> <li>Is the device still not recording after the above operation? 1, Check whether the disk is normal or not, check in System Information - Disk Information.If the disk is abnormal or does not exist, you cannot record.</li> </ul> <img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=963918aab640c7f56ce274aaff187231" alt="" /> 2, Check if the local preview is working. 3, Carefully check whether the recording parameters are selected correctly, whether the recording mode is selected correctly, whether the disk usage is selected correctly, and whether the code flow channel is opened, please refer to this section <V. Detailed Operation>.

VUEWO FAQ

Launch Video

页面列表