Temperature and Humidity sensor
<p>[TOC]</p>
<h3>I. Summary Description</h3>
<p>1, recording the temperature and humidity of the environment in real time.
2, supporting the viewing of temperature and humidity data on CMSV6.
3, Support multiple probes to detect temperature data.</p>
<table>
<thead>
<tr>
<th style="text-align: center;">Model</th>
<th style="text-align: center;">Introduction</th>
</tr>
</thead>
<tbody>
<tr>
<td style="text-align: center;">MH-TH11T</td>
<td style="text-align: center;">-</td>
</tr>
<tr>
<td style="text-align: center;">TSensor-DL10</td>
<td style="text-align: center;">-</td>
</tr>
</tbody>
</table>
<h3>II. Conditions of use</h3>
<p>1, Requires the use of a sensor model supported by the device.
2, The sensor wiring is correct.
3, The device is set correctly on the serial port menu.
4, The parameters on the platform are set correctly.
5, The device 232 serial port is normal, you can refer to [Serial Port Debug](<a href="http://118.195.179.210:9000/web/#/11/259">http://118.195.179.210:9000/web/#/11/259</a> "Serial Port Debug") for self-test.</p>
<h3>III. Process guidelines</h3>
<p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=4171546eb10dcb1c48d529208e82ab10" alt="" /></p>
<p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=17ffd16b29071aea64ff0e68928afc43" alt="" /></p>
<h3>IV. Detailed operation</h3>
<ul>
<li>
<h4>TH11T</h4>
</li>
</ul>
<h5>1, Sensor Information</h5>
<p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=13b4b36d801d160dc3d5f5b4e819111c" alt="" /></p>
<h5>2, Wiring</h5>
<p>Corresponding to the access device 232 serial wire, 12V output wire and GND wire.</p>
<p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=cbf69f507c8c4a3d86af7c036d8ddcc3" alt="" /></p>
<h5>3, Menu Setup</h5>
<p>At the <strong>SERIAL-Serial</strong> Select COM as TH11T, BAUD: 9600(1200-19200), DATA_B: 8, STOP_B: 1, PARITY: NONE.</p>
<p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=02903d980d5de14a892d6457ce02eb6f" alt="" /></p>
<h5>4, Status Presention</h5>
<p>At the <strong>DEVICE STATE-Serial</strong> you can check if the connection status is successful.</p>
<p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=0b55ce16480ba7f43cb30c4abca8c2ca" alt="" /></p>
<h5>5, CMSV6 Setup</h5>
<p>After the device is online, check 2 on the platform Manage -Vehlice-Device INFO-Sensor Param number, and fill in the temperature and humidity to save the TEMP_1 and HUMI_1, as shown in the figure:</p>
<p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=a2ac1194803e12dfe5b197cf24418cbd" alt="" /></p>
<h5>6, CMSV6 Presention</h5>
<p>In the platform vehicle information can be seen humidity and temperature consistent with the values of the temperature and humidity sensors connected to the serial port.</p>
<p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=e3815e11d1ca914dc78afb11c9086f23" alt="" /></p>
<ul>
<li>
<h4>TSensor-DL10</h4>
</li>
</ul>
<h5>1, Sensor Information</h5>
<p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=06c3cab6e908b156938cc84cbfb9e4c1" alt="" /></p>
<h5>2, Wiring</h5>
<p>Cross-access to the device's RS232 serial line, corresponding to access to the device's 12V output line and GND line.</p>
<p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=5d62d2d32ae45f7fadf4ce97e517d6a0" alt="" /></p>
<h5>3, Menu Setup</h5>
<p>At the <strong>SERIAL-Serial</strong> Select COM as TSensor-DL10, BAUD: 9600(1200-115200), DATA_B: 8, STOP_B: 1, PARITY: NONE.</p>
<p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=9e9e1155d8ace83be30b6a08268d9232" alt="" /></p>
<h5>4, Status Presention</h5>
<p>At the <strong>DEVICE STATE-Serial</strong> you can check if the connection status is successful.</p>
<p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=62528c6f72b4fa427d383c718c4b7741" alt="" /></p>
<h5>5, CMSV6 Setup</h5>
<p>After the device TJ808 protocol online, in the platform Manage-Vehicle-Device-INFO-Sensor Param select 2 (temperature-DL10 sensor has two probes), both select the temperature sensor, and finally save, as shown in the figure:</p>
<p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=df6a74eca38a1f101c1086295546f94e" alt="" /></p>
<h5>6, CMSV6 Presention</h5>
<p>The temperature data detected by the probe can be seen on the platform vehicle information.</p>
<p><img src="http://118.195.179.210:9000/server/index.php?s=/api/attachment/visitFile&amp;sign=20e59a1b724a42097af3b2a785032754" alt="" /></p>
<h3>V. Common Problems</h3>
<ul>
<li>
<p><strong>Serial connection status display abnormal</strong>
1, Check whether the wiring is wrong.
2, Check whether the parameters set by the serial port are correct.
3, Check whether the supported sensor models.</p>
</li>
<li><strong>No data displayed on the platform</strong>
1, Check whether the parameters are not set correctly on the platform.</li>
</ul>